Low Intensity Obstruction Light [ LI-00]

Technovators Obstruction Lights are compact, sturdy, power saving LED low intensity lights, available with optional advanced features, if you want. Conforms to ICAO Annexure-14, Type 'B' and IP 55 degree of environmental protection.

An Omni-directional RED Light.

It combines the most modern concept of surface mounted solid state lamps technology (High Powered Lighting Diodes) which are sourced from the most reputed sources.

The high power, high flux solid state lamps give an exceptionally long life of more than 50,000 hours. They consume very less energy and are thus ideally suited for Solar Powered Applications.

The lamps are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of failure.

Efficient secondary optics is induced to generate Lens effect for proper light beam in horizontal plane & arrest unnecessary light dispersion in vertical plane as required by the light specifications.

High quality Aviation RED colour is directly emitted by the Lamps, thus eliminating the need for additional colour filters, which otherwise get faded due to UV radiation of sun.

The Lamps are arranged in Series and Parallels with independent lamp strings, which eliminates total blackout, in the event of an unlikely circuit failure.

The light housing is made from high grade Aluminium Alloy with protective painting.

All the hardware is made from Stainless Steel.

LOW INTENSITY OBSTRUCTION LIGHT
TASS-LI-00

The light is protected from ingress of Dust & Moisture.

Bird spike is provided at the top to protect the luminaire from bird droppings.

Built in Photo controller for Dusk to Dawn operation.

Operating Conditions

•	Temperatures ranging from -50°F to +75°F (-10°C to+23.88°C).
•	Will withstand wind in excess of 150 mph (240 kph), (150 knots)
•	Fog, Rain
•	Humidity :8%
•	Does not create Electromagnetic Interference
•	Does not create Radio Frequency Interference

Photometric Data

Night Mode	Red
Vertical Beam Spread
Horizontal Coverage	360 °
"Ground Scatter Light" cut-off angle	-5 °
Flash Rate	Stationery Mode

Electrical Specifications

Input Supply	Operating Voltage		System Operating on DC Volts	Current (Amp)		Volt Amps (VA)		Watts (V x I)
Input Supply	Min	Max	System Operating on DC Volts	Min	Max	Min	Max	Watts (V x I)
220V AC with SMPS Supply	150 V AC	275 V AC	12 V	300mA	500mA	3.6	6	6
			24 V	150mA	250mA	3.6	6	6
			48 V	75mA	125mA	3.6	6	6
220VAC (50Hz)	150 V	275 V AC	12 V	300mA	500mA	3.6	6	6
			24 V	150mA	250mA	3.6	6	6
			48 V	75mA	125mA	3.6	6	6

Light Characteristics

ICAO Type	Type "A"
Light Source	LED Cluster
Light Color	RED
Intensity	> 10 cd
Horizontal Divergence	360 °
Lamp Life	> 1,00,000 hrs
Radial Emission	As per CISPR 11

Physical Characteristics

Body Material	Cast Aluminium (or Fibre)
Lense Material	Polished Acrylic
Mounting	Cast Aluminium
Height (mm/inches)	200 ± 5 mm
Width (mm/inches)	85 mm triangle
Mass (Kg/lbs)	1.8 Kg Approx.

Operation

Minimum Autonomy	24 hrs.
Minimum Equivalent Peak Sun Hours to Maintain Minimum Autonomy	< 3 cd
Latitude Range	1000 meter
On/Off Level	Automatic
Illumination Technology	Photons generation with LED conduction
Lifespan of LEDs	> 1,00,000 hrs.
Available Flash Patterns	20 - 60 FPM
Color Technology of LED	Depend upon Semiconductor material of LED

Construction

Lens Material	Polished Acrylic
Sealing	EPDM Gasket
Weight	1.8 Kg Approx.

Environmental and Electrical

Temperature Range	- 40 ° C to + 50 ° C
Waterproof	Through EPDM Gasket and Sealant
Environment Protection Standard for Light	IP 65 Standard
Environment Protection Standard for Control Panel	IP 55 Standard

Weight & Measurements (Shipping info)

APPROX SHIPPING WEIGHT	DIMENSIONS	VOLUME
Kg	mm	cu ft