Low Intensity Obstruction Light - LI INTG

The rapid growth of the cellular phone industry and other communication services will lead up to millions of new communication towers all over the Globe. These towers present hazards to flight paths of aircrafts, so these towers should be marked with obstruction lights to make sky safer to fly. “Technovators” Tower Marking Low Intensity Obstruction Lights are compact, sturdy, power saving LED low intensity lights, available with optional advanced features, if you want. TASS-LI-INTG model is used on top of towers as an obstruction marker for navigating aircrafts.
Features

ICAO (Type A & B) compliant product design and performace
Omnidirectional RED light source (10 cd - 32 cd)) hence no requirement of filters that fade quickly
Customizable for both AC and DC conditions
Multiple light elemens in the source reduce complete blackout possibility due to a single source failure
High quality optics for excellent beam spread control.
Light weight sturdy casings (of high quality die-cast aluminum)
All hardware of Tower marker obstruction lights are made of corrosion resistant metals.
Excellent dust and moisture sealing through improved gaskets.
Bird spikes for protection against droppings

Operating Conditions for Tower Marking Obstruction Lights

Photometric Data

Colour of Light	Red
Vertical Beam Spread	10 °
Horizontal Coverage	360 °
"Ground Scatter Light" cut-off angle	-5 °

Low Intensity Obstruction Light

TOWER MARKING LOW INTENSITY OBSTRUCTION LIGHT
TASS-LI-INTG

Electrical Specifications of Tower Marker Obstruction Lights Model:TASS-LI-INTG

Input Supply	Operating Voltage		System Operating on DC Volts	Current (Amp)		Volt Amps (VA)		Watts (V x I)
Input Supply	Min	Max	System Operating on DC Volts	Min	Max	Min	Max	Watts (V x I)
220V AC with SMPS Supply	150 V AC	275 V AC	12 V	300mA	500mA	3.6	6	6
			24 V	150mA	250mA	3.6	6	6
			48 V	75mA	125mA	3.6	6	6
220VAC (50Hz)	150 V	275 V AC	12 V	300mA	500mA	3.6	6	6
			24 V	150mA	250mA	3.6	6	6
			48 V	75mA	125mA	3.6	6	6

Light Characteristics of Tower Marking Obstruction Lights

ICAO Type	Type "A"
Light Source	Solid State Lamps
Light Color	RED
Intensity	> 10 cd
Horizontal Divergence	360 °
Lamp Life	> 1,00,000 hrs
Radial Emission	As per CISPR 11

Physical Characteristics of Tower Marker Obstruction Lights

Body Material	Compression Molded Glass Fiber reinforced Polyester
Lense Material	Polished Acrylic
Height (mm/inches)	225 mm
Width (mm/inches)	160 ± 5 mm
Mass (Kg/lbs)	5 Kg Approx.

Construction of Tower Marking Obstruction Lights

Lens Material	Polished Acrylic
Sealing	Improvised Gasket
Weight	1.7 Kg Approx.

Environmental and Electrical

Temperature Range	- 20 ° C to + 50 ° C
Waterproof	Through improvised Gaskets and Sealant
Environment Protection Standard for Light	IP 65 Standard
Environment Protection Standard for Control Panel	IP 55 Standard

Weight & Measurements (Shipping info)

APPROX SHIPPING WEIGHT	DIMENSIONS	VOLUME
Kg	mm	cu ft

Applications

High-rise Power and telecom transmission towers for warning planes etc.

Special Information

These luminaire systems require separate control gear for AC operations.
Also, DC-DC regulator is recommended in cases where input DC voltage variation exceeding 5% is expected.
Luminares are available in DC (12/24/48 volts) and AC (110/230) environments. Also available with flasher as an option.
All LED's have a life of 1,00,000 hrs.